– Cary Frame, CEO of Polargy, says:
With rigid hot and cold aisle containment systems, inches are important in the server rack world. Any slight variances matter in the containment world, because the difference of even one inch can dramatically impact the fit and installation of the containment system.
To get the containment design right the first time, a designer needs to pay attention to the following:
1. 609mm versus 600mm rack width
APC, Chatsworth, and Rittal racks, among others of their type, are built to 600mm width international standard, which accommodates their global distribution model. More domestically oriented rack makers, like Polargy, Damac, and ElectroRack, provide 24.0” or 609mm wide racks. That 0.4” difference is slight, but it matters when trying to accurately size the containment.
2. Slab versus raised floor rack to tile alignment
What can be tricky for containment is that on raised floors, as built domestically, the rack layout often aligns to the tiles, leaving a 0.4” gap between each rack for those 600mm racks. It is important to pay attention to this detail when specifying panel sizes.
3. Groupings of 23.6” racks and if they are gapped by 0.4” or not
When identifying a containment system that is based on the racks, the designer is well served to pay attention to the true rack size. A 24.0” wide roof panel leaves a 0.4” overlap on a 23.6” cabinet, as illustrated in the photo above. This variance is multiplied ten times for a row of ten racks and the resulting overlap is a whole 4.0”.
4. The last rack of the row relative to the other racks and their consequent widths and gaps.
What can be especially tricky is the last rack of the row. In the scenario of 23.6” racks aligned to 24” tiles, one would have all 24.0” wide panels but for the last panel, which would be 23.6” since that is where the aisle truly ends. And, if that last panel is sticking out by 0.4”, then it will obstruct the placement of the aisle end door. These subtle differences in measurements between the US and international standards should be specified with deliberation, because in the containment world, inches count.
Cary Frame is the CEO of Polargy, a leading provider of hot- and cold-aisle containment solutions for data centers. Polargy products and solutions are installed in the data centers of some of the world’s most demanding technology companies, including Dell, Pixar and Verizon. Today, Polargy customers are saving millions of kilowatt hours annually using the innovative PolarPlexTM family of products.
(1) Reader Comment
March 01, 2013
June 15, 2011
May 20, 2014
January 30, 2012
August 18, 2017
August 18, 2017
August 17, 2017
Hi i came across this article on the internet news service and i must
Microsoft Exchange Server is the best choice of the Small business, Ge
I am a Sergeant with our local police department our dispatch center h
"However, the single power supply serving multiple blade servers is a
Above posted Business continuity plans are direct and to the point.Bus